Error Code: 0x80300024 When Installing Windows

The error code 0x80300024 might occur during the installation of any version of Windows OS. “Windows is unable to install to the selected location“, it said.

It may result as a result of the following factors:

There isn’t enough space on the destination drive.
Installation media that has been damaged or corrupted.
A hard drive that has been damaged or corrupted.

This 0x80300024 problem can occur in any version of the Windows operating system. So, here are a few options for fixing the 0x80300024 problem.

5 Solutions to Error Code 0x80300024

Method 1: Remove any unnecessary hard drives before installing Windows

Step 1: Check to see if your computer has more than one hard disc connected to it.

Step 2: If you answered yes, it’s possible that other hard drives are interfering with the installation of Windows on one of them.

Step 3: If this is the case, remove the other hard drives and reinstall the operating system.

Read Also:

Method 2: Try Plugging the Installation Media Into A Different USB Port If WebGL Isn’t Working

Step 1: If you’re installing Windows from a USB drive, the issue could be with the USB port.

Step 2: Change the port to see whether you can install Windows (change from USB 2.0 to USB 3.0 or vice-versa)

Step 3: Reinstall Windows and see if the error 0x80300024 has gone away.

Method 3: Ensure that the target drive is listed first in the computer’s boot order

The fact that your hard disc is not at the top of the computer’s boot order is one of the causes of the error 0x80300024.

During startup, the computer determines the sequence in which the OS attempts to boot from various sources. To solve the problem, make sure your hard drive is at the very top of the list.

Here are some suggestions for how to go about it:

Step 1: Turn on your computer.

Step 2: When the computer first starts up, check for a command to press a certain key (usually Delete+F1/F2).

Step 3: To enter the BIOS, press the key provided.

Step 4: After you’ve entered the key, go to BIOS and look for boot order. The boot order is usually found under the BIOS’s Boot Tab.

Step 5: Now rearrange the order such that the hard disc where you’re trying to install Windows is at the top.

Step 6: Make sure the boot mode is set to “UEFI“. The option should be found in the BIOS’s Boot section.

Step 7: Make a backup of the changes you made in the previous steps.

Step 8: Shut down the computer and exit the BIOS.

Step 9: Restart the Windows installation to see if the 0x80300024 error has been resolved.

Method 4: Prepare the installation site

The partition on your hard disc can also cause this issue 0x80300024. Check to see if the partition on the hard drive you’re installing Windows on is new or has been used previously. It’s possible that some of the data is interfering with the installation.

As a result, formatting the installation location before installing Windows is advised. If the problem is with the data, the error can be fixed by formatting the entire installation location.

Here are some instructions on how to go about it:

Step 1: Restart your computer after inserting the bootable installation disc. If you don’t already have the installation media, you’ll need to make it.

Step 2: Select to boot from installation media when the computer starts up.

Step 3: Adjust the language, keyboard layout, and other parameters as needed.

Step 4: For the type of Windows installation, select Custom.

Step 5: To get to the level “Where do you want your windows to be put“, go to Drive Options and then to the level “Where do you want your windows to be installed” (Advanced).

Step 6: Select the partition where you wish to install Windows and then select Format.

Step 7: Double-check the modifications.

Step 8: After the HDD partition has been formatted, click next.

Step 9: If it still doesn’t work, select the drive and click Delete rather than Format.

Step 10: Make a new partition and install Windows on it.

Step 11: Verify that the 0x80300024 error has been resolved.

Method 5: Get a new hard drive

If none of the aforementioned alternatives resolve the issue, your hard disc is most likely dying or dead. The installation of Windows is hampered by a failing hard drive. Replace your hard disc with a new one and install the Windows operating system.